As for gas water heaters, only professionals with special rights and licenses can install them. But you can connect the electric apparatus yourself if you follow the advice of all the same specialists and strictly adhere to the given scheme. However, the installation of the device by the best plumbers in Canberra will save you from unnecessary headaches and further unexpected difficulties. Although, it is still worth knowing the general connection scheme and excess knowledge in this area.
But sometimes, even a small leak in the water heater over time develops into an expensive repair. The water damaged floors, furniture, walls leads to the appearance of fungus. Therefore, you need to start repairing as soon as possible. So, what points are taken into account when installing the boiler? In order to avoid correcting errors after some time, the specialist adheres to the following points:
The water heater should be easily accessible and not be cluttered with anything;
Water pipes should be clean, without blockages, so it is better to replace the old ones;
Change the wiring to a new one, if it is old so that the boiler can work continuously and the wiring can withstand such a load.
And, another reason to contact specialists is that special tools are required for installation.
Well, here we discuss in detail why we need to hire a professional plumber to install a water heater. So, let’s have a look
Table of Content
- Reasons for Calling a Professional Plumber to Install Water Heater
- Care and Maintenance
- Risk of Explosion
- Require Mandatory Installation of a Safety Valve
- Casing Deformation
- Bottom Line
Reasons for Calling a Professional Plumber to Install Water Heater
Care and Maintenance
Any device requires care but with water heaters, it comes down to two main functions like replacing the magnesium anode and protecting the inside the device from scale and corrosion. An anode is a metal pin on which a layer of magnesium is applied. This layer gradually dissolves, preventing the formation of corrosive spots and salt deposits on the heating element. However, if your water heater is dealing with hard water, then probably hiring plumber is a more appropriate decision. In order to improve the quality of water, special filters are installed by the plumbers on the pipes before connecting. Before starting cleaning work, turn off the appliance, drain the water from it, carefully remove the flange, and then remove the scale from the heating element.
Warranty repair of the device is carried out during the warranty period by the plumbers of the service center for free. However, the water heater is first checked for the nature of the problems and their possible causes. If breakdowns are not the fault of the user, then the plumbers will extend the warranty period until the repair is completed. But, if the water heater has slight mechanical or thermal damage, as well as if the appliance has a non-marketable appearance, then warranty repairs must still be carried out by the professional plumbers. They can handle any type of repair of water heaters.
Risk of Explosion
Improper boiler piping cannot only be a threat to health but also to people’s lives. This is due to the fact that when the water is heated, the thermodynamic effect often goes out of control, which further leads to making the boiler an explosive device. Inside the tank, pressure and a large amount of steam accumulate, which leads to an explosion. But, when the critical temperature and pressure are reached, the plumbers will compress the spring in the cylinder for releasing the liquid and steam. This quickly leads to the normalization of pressure in the system. The issues related to pressure and gas plumbing Canberra can only be tackled by professional plumbers.
Require Mandatory Installation of a Safety Valve
The quality of the strapping of the water heater allows not only to increase its service life but also increases the level of safety during operation. Installation of the boiler is carried out according to the manufacturer’s instructions and taking into account the connection standards. The safety valve for the boiler is an important element of the device belonging to the safety group. The task of the safety valve is to protect the sewer pipe and connected devices from failure and destruction, which can occur as a result of excessive pressure in the system.
It appears due to irregularities during the installation of the water heater. Most likely, the safety valve is missing or faulty. And, the dripping water from the boiler is noticeable immediately after the installation of the water heating apparatus. During cooling, the liquid volume decreases, and the boiler tank contracts. But, during the filling of the water heater, the water begins to warm up, which increases the increasing pressure inside it. Due to the growth of the latter, the tank begins to swell, causing a leak in the housing. But, with the help of a plumber, you can get rid of this problem and make use of your water heater again.
Before installation, you need to take care of grounding, the presence of an anode of magnesium, and also prepare a safety valve. The blocked drain Canberra can only be handled by professional plumbers. If even a minimal leak is detected in the water heater, then you need to quickly take care of solving the problem. Regardless of the degree of damage, it is always recommended to call a professional plumber and check the source of leakage.